Square & Rectangular Cast Iron Grates

CAST IRON SPECIFICATION >>>

MATERIAL:	Casting materials conform to specification ASTM-A48 Class 30B, Gray Cast Iron, unless otherwise specified
APPEARANCE:	Castings are free from blowholes, shrinkage or other imperfections not true to pattern.
MANUFACTURING:	Castings are manufactured with critical dimensions conforming to those specified on respective data sheets and drawings. Critical dimensions are defined as those that effect the load bearing capacity, interchangeability and drainage opening where applicable. Noncritical dimensions may change slightly to facilitate proper molding and casting technique. We reserve the right to make modifications to these products as required without notification.
TOLERANCES:	Casting Tolerances, unless otherwise specified, are plus or minus 1/16 inch, and an additional plus or minus 1/16 inch per foot of dimension. Notwithstanding these tolerances, all frames, covers, grates and curb hoods of the same nominal size are interchangeable.
MACHINING:	Bearing surfaces of circular heavy and medium duty manhole rings, covers and grates are machined to insure proper fit and prevent rattling.
WEIGHTS:	Casting weights are approximate and shall be within plus or minus 5% of catalog published weight.
PAINT:	Castings are supplied unpainted as a standard (See U.S. Foundry's No Paint Policy). For special paint applications, contact our customer service department.

LOAD DESIGNATIONS FOR CAST IRON PRODUCTS >>>

CLASSIFICATION	LOAD APPLICATIONS	PROOF LOAD TEST
(H) HEAVY DUTY	Highway traffic loads or 16,000 lb. Wheel loads	25,000 lbs. * (Ref: Commercial Item Description A-A 60005)
(M) MEDIUM DUTY	Driveways, parking lots, ramps and other similar applications where wheel loads do not exceed 12,000 lbs.	18,000 lbs. *
(L) LIGHT DUTY	Areas such as sidewalks, terraces and other areas which do not receive vehicular traffic.	1,000 lbs. *

All square and rectangular cast iron grates can be supplied with galvanized or painted steel angle frames.

There are currently 114 items in the list

Shape	Width	Length

USFID	Style	Shape	Width	Length	Seat Height	Slot Size	Flow Area	Weight	2SLB	2SSB	4SB
6100	51-R	Rectangular	8	24	1-1/2	1-1/4 x 5-1/2	70	40	(-)	H	H
6105	52-R	Rectangular	10	24	2-3/16	1 x 3-1/2	75	70	(-)	H	H
6106	51	Rectangular	12	24	1-3/4	1-1/16 x 9	105	75	(-)	H	H
6110	51	Square	11-3/4	11-3/4	3/4	7/16 x 10	45	15	L	L	L
6113	52	Rectangular	21-1/2	24	2	1-1/2 x 8-7/8	235	135	(-)	H	(-)
6115	56-R	Rectangular	11-3/4	48-1/2	1-3/4	1-1/8 x 4-1/2	160	160	(-)	H	H
6117	52-R	Rectangular	10	24	1-1/2	1 x 3-1/2	75	50	(-)	H	(-)
6118	52-R	Rectangular	12	24	1-1/2	1 x 4-1/2	100	60	(-)	H	H
6120	52-R	Rectangular	12	24	2-3/16	1 x 4-1/2	100	80	(-)	H	H
6121	55-R	Square	15	15	1-1/4	1-1/2 x 1-1/2	55	45	H	H	H
6125	53-R	Square	13	13	1/2	1 x 3	55	15	L	L	L
6127	52-R	Rectangular	14	18	1-1/2	1-1/16 x 5-1/4	90	55	(-)	M	H
6130	52-R	Rectangular	14	25-3/8	2	1-3/16 x 5-5/16	140	90	(-)	H	H
6131	52	Rectangular	16-1/2	26-3/4	2	1-1/4 x 6-3/8	175	115	(-)	H	H
6133	52	Rectangular	20-13/16	23-3/4	1-1/4	1-3/16 x 8-7/16	215	80	L	L	L
6135	51	Rectangular	14	36	2	1 x 11-3/4	200	120	(-)	L	L
6137	51	Rectangular	26-1/4	23	1-1/2	2-1/4 x 21-3/4	290	105	L	(-)	L
6138	51	Rectangular	13-1/4	27-1/4	2	2 x 10	160	90	(-)	H	H
6140	52-R	Rectangular	14	24	2-3/16	1 x 5-1/2	120	90	(-)	H	H
6141	52-R	Rectangular	14	24	2	1 x 5-1/2	120	90	(-)	H	H
6142	52	Rectangular	20	14-1/2	3/4	3/4 x 7-7/8	120	30	L	(-)	L
6145	52-R	Rectangular	16	24	1-1/2	1-5/8 x 5	130	80	(-)	H	H
6147	52-R	Rectangular	16-3/4	21-3/4	1-3/4	1-5/16 x 6-7/16	135	95	(-)	H	H
6148	52	Square	22	22	1-3/4	1-1/4 x 8-7/8	175	120	H	H	H
6150	55-R	Rectangular	39	18	2	1-1/4 x 6-1/16	270	205	L	L	H
6151	51	Rectangular	21	28-3/4	2-1/2	1 x 17	220	200	(-)	H	H
6152	51	Rectangular	21-3/4	33-3/4	2-3/4	1-1/2 x 19	370	230	(-)	H	H
6153	54-R	Rectangular	24	14	2-3/16	1-1/16 x 4-5/8	220	110	H	H	H
6155	55-R	Square	24	24	1-1/2	1-7/16 x 3-7/16	220	120	L	L	M
6160	53-R	Square	24	24	2	1-3/4 x 6	220	150	L	L	M
6165	55-R	Rectangular	26	32-3/8	4	3-3/8 x 3-5/8	430	345	H	H	H
6170	53	Rectangular	35	24	1-3/4	2 x 8-1/2	355	220	L	L	M
6172	53	Rectangular	36	24	1-3/4	1-5/8 x 10-1/2	460	155	L	L	H
6175	56-R	Square	36-1/2	36-1/2	4-1/2	3-1/4 x 3-1/4	675	650	H	H	H
6178	51	Rectangular	37-3/4	17-3/4	3-1/2	1-3/4 x 35-1/2	370	240	H	(-)	H
6179	54-R	Square	26	26	1	1/2 x 5-1/4	220	110	L	L	L
6180	55-R	Rectangular	39	24	2-5/8	1-1/8 x 6	270	400	H	H	H
6185	52-R	Rectangular	13	24	1-3/4	1 x 4-1/2	100	85	(-)	H	(-)
6190	52	Rectangular	24	36	1-1/2	1-3/16 x 9-1/2	285	270	(-)	H	H
6191	52	Rectangular	23-7/8	35-1/2	1-1/2	1-9/16 x 9-1/16	365	200	(-)	L	(-)
6195	53-R	Rectangular	26	36	1-1/2	1-1/16 x 6-5/16	340	300	(-)	H	H
6196	52	Square	23-3/4	23-3/4	1-3/4	2-1/8 x 10-1/16	300	115	L	L	M
6198	53	Square	28	28	2	1-5/8 x 7	240	410	H	H	H
6200	53-R	Rectangular	15	24-1/2	2	1-7/8 x 3-5/8	185	95	(-)	H	(-)
6201	52-R	Rectangular	15	23	1-3/4	1-1/2 x 5-7/16	130	90	(-)	H	H
6202	51	Rectangular	17	22	3/4	1-3/8 x 16	220	25	(-)	L	L
6203	54-R	Square	30	30	2	1 x 6	335	355	H	H	H
6205	52	Square	17-3/4	17-3/4	1-1/2	1 x 7-3/8	120	75	H	H	H
6208	52	Rectangular	27-7/8	36	1-1/2	1-9/16 x 10-3/4	435	220	(-)	L	H
6209	53	Rectangular	27-7/8	35-7/8	2	1-5/8 x 7-5/16	455	265	L	H	H
6210	52	Rectangular	27-7/8	35-7/8	2	1-5/8 x 10-15/16	445	235	(-)	L	H
6212	54-R	Rectangular	28	36-1/2	2	1-11/16 x 5-1/4	420	295	(-)	H	H
6213	52	Rectangular	27-3/4	35-3/4	2	1-5/16 x 11-11/16	425	265	L	M	H
6214	52-R	Rectangular	14	24	2	1 x 5-1/4	115	115	(-)	H	(-)
6215	52	Rectangular	28	31	2-1/4	1-1/2 x 11	360	260	(-)	M	H
6217	54-R	Square	27-7/8	27-7/8	1-1/2	1-1/4 x 5-1/4	260	170	L	L	M
6218	54-R	Rectangular	24	36	2	1-3/8 x 4-5/8	380	225	(-)	L	H
6220	52	Rectangular	18	28	2-5/16	1-1/2 x 7-1/8	210	155	L	H	H
6224	52	Rectangular	18	28	2-5/16	1-9/16 x 7-5/8	225	150	(-)	H	H
6225	54-R	Rectangular	18	28	2-5/16	1-7/16 x 3-1/4	185	155	L	H	H
6226	52	Rectangular	19	24	1-1/2	1-3/8 x 7-3/16	180	120	(-)	H	H
6227	52	Rectangular	20	24	2-1/4	1-5/16 x 7-3/4	160	165	(-)	H	H
6228	51	Rectangular	23-7/8	21-1/2	2-1/2	1-1/4 x 21-3/8	240	175	H	(-)	H
6230	52	Square	24	24	1-1/2	1-1/4 x 9-15/16	245	150	M	M	H
6232	52	Square	14-3/8	14-3/8	1	15/16 x 6-1/16	90	25	L	L	L
6235	54-R	Square	24	24	1-1/2	1-1/4 x 4-1/2	225	155	H	H	H
6237	52	Rectangular	23-3/4	35-3/4	1-3/4	1-1/2 x 9-7/8	445	170	L	L	H
6238	52	Rectangular	23-3/4	35-3/4	1-3/4	1-1/2 x 9-7/8	445	170	L	L	H
6240	52	Rectangular	24	35	1-3/4	2 x 9-3/4	390	290	L	H	H
6241	54	Square	37-3/4	37-3/4	1-1/2	1-3/8 x 8-1/8	715	345	H	H	H
6242	52	Rectangular	24	35	3	2 x 9-3/4	390	410	H	H	H
6245	52	Square	29-3/4	29-3/4	1-1/2	1-3/16 x 12-7/8	375	215	L	L	H
6246	54-R	Square	29-3/4	29-3/4	1-1/2	1-1/8 x 6	320	235	L	L	H
6247	54-R	Square	35-5/8	35-5/8	1-1/2	1-5/8 x 6-1/2	545	285	L	L	M
6248	52	Square	29-3/4	29-3/4	1-1/2	1-1/8 x 12-7/8	345	245	H	H	H
6249	54-R	Square	24	24	2	1-1/2 x 4-1/2	240	150	L	L	H
6250	52	Rectangular	27	24	2-1/8	1-7/16 x 10-7/8	220	200	H	(-)	H
6255

Site Menu

Grate Styles

Grate Seating

Past Projects

Specials

Square & Rectangular Cast Iron Grates

CAST IRON SPECIFICATION >>>

LOAD DESIGNATIONS FOR CAST IRON PRODUCTS >>>